Leapfrog MAXX Essentials PLA

44,00 $ IVA no incluido 53,24 $ IVA incluido

Disponibilidad: En existencias

* Campos Requeridos

44,00 $ IVA no incluido 53,24 $ IVA incluido
Leapfrog MAXX Essentials PLA filament is an all round, biodegradable material made of corn. It has a lower melting point than ABS which makes it more suitable for higher printing speeds. More detail can be achieved compared to ABS and the finish is overall smoother. It also has a reduced chance of splitting between separate layers and warping as opposed to ABS filament. It is available in a wide range of colours.

Presupuesto Every little detail, yes, really everything

Presupuesto

  • Extrusion temperature 205-215 °C
  • Extrusion temperature (Fahrenheit) 400-420 F
  • Bed temperature 45 °C
  • Bed temperature (Fahrenheit) 113 F
  • Ease of printing high
  • Warping low
  • Layer bonding medium
  • Recommended printer setup standard

General

  • Suitable for HS (XL), Xeed, XceL, Bolt
  • Filament diameter (mm) 1.75
  • Filament diameter (IN) 0.069
  • Weight (kg) 0.75
  • Weight (lbs) 1.65
  • Unique property Made from corn

QUÉ DICE LA GENTE DE NOSOTROS

Bolt-Review-make_logo_rgb-2-review-post

Definitely one of the best printers we’ve ever tested.

Bolt-Review-make_logo_rgb-2-review-post

The Bolt is a powerful device with industrial mechanics and proved to be easy to use in the test.

[translated from german]

Bolt-Review-make_logo_rgb-2-review-post

What I enjoyed most were the two independent extruders, the air filter and the good print quality when printing with ABS and many other materials.