Leapfrog PLA

49,00 € Exkl. MwSt 59,29 € Inkl. MwSt

* Pflichtfelder

Leapfrog PLA is a biodegradable thermoplastic made from renewable resources such as corn starch. It is widely used and has the second highest consumption volume of any bioplastic in the world. PLA is food safe and non toxic, therefore it is used for a lot of (food)packaging purposes.

PLA can be used to print high detailed parts in a short amount of time with relative ease. The printed parts will be reasonably strong, but also quite brittle. In heated environments, think about a car in the summer, PLA can deform. This means that PLA is not advised to be used in parts that needs to withstand a lot of stress of extreme environments.

We recommend PLA for (scale) models, Prototypes, test prints.

To keep your filament in optimal conditions, always store it in a bag and in a dark and cool environment. Heat and moisture have a negative effect on your filament so it is advised to avoid those factors.


Technische Daten Every little detail, yes, really everything

Technische Daten

  • Extrusion temperature 205-215 °C
  • Extrusion temperature (Fahrenheit) 400-420 F
  • Bed temperature 45 °C
  • Bed temperature (Fahrenheit) 113 F
  • Ease of printing high
  • Warping low
  • Layer bonding high
  • Recommended printer setup standard

Allgemein

  • Suitable for HS (XL), Xeed, XceL, Bolt
  • Filament diameter (mm) 1.75
  • Filament diameter (IN) 0.069
  • Weight (kg) 0.75
  • Weight (lbs) 1.65
  • Unique property Made from corn

WAS ANDERE ÜBER UNS SAGEN

Bolt-Review-make_logo_rgb-2-review-post

What I enjoyed most were the two independent extruders, the air filter and the good print quality when printing with ABS and many other materials.

Bolt-Review-make_logo_rgb-2-review-post

The Bolt is a powerful device with industrial mechanics and proved to be easy to use in the test.

[translated from german]

Bolt-Review-make_logo_rgb-2-review-post

Definitely one of the best printers we’ve ever tested.