Creatr HS

Push in coupling 3D printer 4mm, M5

Push in coupling 3D printer 4mm, M5
US$ 4,50 Excl. VAT US$ 5,45 Incl. VAT

Push in coupling 3D printer 6mm, M5

Push in coupling 3D printer 6mm, M5
US$ 4,50 Excl. VAT US$ 5,45 Incl. VAT

Push in coupling 3D printer 6mm, M6

Push in coupling 3D printer 6mm, M6
US$ 4,70 Excl. VAT US$ 5,69 Incl. VAT

Nozzle Block 0.5mm right

Nozzle Block 0.5mm right
US$ 17,50 Excl. VAT US$ 21,18 Incl. VAT

Nozzle Block 0.5 mm left

Nozzle Block 0.5 mm left
US$ 17,50 Excl. VAT US$ 21,18 Incl. VAT

US Power cord (110V)

Power cord for your Leapfrog Printer, suitable for the United States
US$ 5,87 Excl. VAT US$ 7,10 Incl. VAT

Timing belt X-axis

Timing belt X-axis
US$ 10,57 Excl. VAT US$ 12,79 Incl. VAT

Timing belt Y-axis

Timing belt Y-axis
US$ 10,57 Excl. VAT US$ 12,79 Incl. VAT

Fan Duct (HS / HS XL)

Fan Duct (HS / HS XL)
US$ 5,87 Excl. VAT US$ 7,10 Incl. VAT

A20 processor board

A20 processor board
US$ 116,23 Excl. VAT US$ 140,64 Incl. VAT

LMC HS

LMC HS
US$ 327,55 Excl. VAT US$ 396,34 Incl. VAT

Creatr Heated Print Bed

Creatr Heated Print Bed
US$ 109,00 Excl. VAT US$ 131,89 Incl. VAT

Drive gear

Drive gear
US$ 13,50 Excl. VAT US$ 16,34 Incl. VAT

Drive unit (HS)

Drive unit (HS)
US$ 169,00 Excl. VAT US$ 204,49 Incl. VAT

Drive unit cooler (HS) (set of 2)

Drive unit cooler (HS) (set of 2)
US$ 45,79 Excl. VAT US$ 55,41 Incl. VAT

NEMA 17 stepper motor (48mm)

The Nema 17 stepper motor is used for the extruders and both the Y- and X-axis.
US$ 35,00 Excl. VAT US$ 42,35 Incl. VAT

Filament guiding tube 4mm-2mm

Filament guiding tube 4mm-2mm
US$ 15,00 Excl. VAT US$ 18,15 Incl. VAT

Filament guiding tube 6mm-4mm

Filament guiding tube 6mm-4mm
US$ 15,00 Excl. VAT US$ 18,15 Incl. VAT

Flexi Gland

Flexi Gland
US$ 16,44 Excl. VAT US$ 19,89 Incl. VAT

Heater cartridge assembly (HS)

Heater cartridge assembly (HS)
US$ 15,00 Excl. VAT US$ 18,15 Incl. VAT

HS fan with plug

HS fan with plug
US$ 9,00 Excl. VAT US$ 10,89 Incl. VAT

Z-axis Induction sensor (CRT (XL) / HS (XL))

The induction sensor is used to indicate the home position of the bed on the Z-axis.
US$ 39,00 Excl. VAT US$ 47,19 Incl. VAT

Micro switch (CRT / HS)

The micro switch is a mechanical switch. These are used to indicate the home position of the both the X- and Y-axis.
US$ 5,00 Excl. VAT US$ 6,05 Incl. VAT

Nozzle Block 0.35mm left

Nozzle Block 0.35mm left
US$ 19,00 Excl. VAT US$ 22,99 Incl. VAT

Nozzle Block 0.35mm right

Nozzle Block 0.35mm right
US$ 17,50 Excl. VAT US$ 21,18 Incl. VAT

Printhead PCB

Printhead PCB
US$ 10,00 Excl. VAT US$ 12,10 Incl. VAT

Radial fan 50x50x15 24V assembly (HS)

Radial fan 50x50x15 24V assembly (HS)
US$ 9,00 Excl. VAT US$ 10,89 Incl. VAT

Thermistor assembly (HS)

Thermistor assembly
US$ 5,50 Excl. VAT US$ 6,66 Incl. VAT