Leapfrog MAXX PRO Nylon

US$ 56,00 Excl. VAT US$ 67,76 Incl. VAT

Beschikbaarheid: Op voorraad

* Verplichte velden

US$ 56,00 Excl. VAT US$ 67,76 Incl. VAT
Leapfrog MAXX PRO Nylon (PA12) is a strong, rigid material that can withstand much more pressure than ABS. The printing properties are better than ABS, although the bonding to the print bed is weaker. Nylon is most famous in it's textile form but nylon is also widely used for light, heavy duty parts like cog wheels or car parts.

Specificaties Every little detail, yes, really everything

Specificaties

  • Extrusion temperature 240-250 °C
  • Extrusion temperature (Fahrenheit) 464-482 F
  • Bed temperature 80 °C
  • Bed temperature (Fahrenheit) 176 F
  • Ease of printing medium
  • Warping medium
  • Layer bonding very high
  • Recommended printer setup Dry filament, strong bed adhesive

Algemeen

  • Suitable for HS (XL), Xeed, Bolt
  • Filament diameter (mm) 1.75
  • Filament diameter (IN) 0.069
  • Weight (kg) 0.5
  • Weight (lbs) 1.1
  • Unique property Chemical resistant

Referenties

Bolt-Review-make_logo_rgb-2-review-post

Definitely one of the best printers we’ve ever tested.

Bolt-Review-make_logo_rgb-2-review-post

The Bolt is a powerful device with industrial mechanics and proved to be easy to use in the test.

[translated from german]

Bolt-Review-make_logo_rgb-2-review-post

What I enjoyed most were the two independent extruders, the air filter and the good print quality when printing with ABS and many other materials.