Creatr

Push in coupling 3D printer 4mm, M5

Push in coupling 3D printer 4mm, M5
4,00 € HT 4,84 € TTC

Push in coupling 3D printer 6mm, M5

Push in coupling 3D printer 6mm, M5
4,00 € HT 4,84 € TTC

Push in coupling 3D printer 6mm, M6

Push in coupling 3D printer 6mm, M6
4,00 € HT 4,84 € TTC

Nozzle Block 0.5mm right

Nozzle Block 0.5mm right
19,00 € HT 22,99 € TTC

Nozzle Block 0.5 mm left

Nozzle Block 0.5 mm left
19,00 € HT 22,99 € TTC

Y carriage assembly right (CTR)

Y carriage assembly right (CTR)
14,00 € HT 16,94 € TTC

Y carriage assembly left (CTR)

Y carriage assembly left (CTR)
14,00 € HT 16,94 € TTC

US Power cord 110V

Power cord for your Leapfrog Printer, suitable for the US
5,00 € HT 6,05 € TTC

Timing belt X-axis

Timing belt X-axis
9,00 € HT 10,89 € TTC

Timing belt Y-axis

Timing belt Y-axis
9,00 € HT 10,89 € TTC

4 Wire Cable for X (2 connectors) (CRT (XL) / HS (XL) / XD)

4 Wire Cable for X (2 connectors) (CRT (XL) / HS (XL) / XD)
4,00 € HT 4,84 € TTC

Heated Print Bed

Heated Print Bed
99,00 € HT 119,79 € TTC

Creatr fan set with plug

Creatr fan set with plug
9,00 € HT 10,89 € TTC

interchangeable Creatr (XL) Hot End 0.35 mm

interchangeable Creatr (XL) Hot End 0.35 mm
39,00 € HT 47,19 € TTC

Creatr Power Supply

The power supply can work both on 115V/230V. Output: 24V 400W.
99,00 € HT 119,79 € TTC

Creatr Z-axis motor

The Nema 23 stepper motor is used to move the printbed up and down. It has a specially manufactured 6mm axis.
41,00 € HT 49,61 € TTC

Extruder/Y-axis/X-axis stepper motor

The Nema 17 stepper motor is used for the extruders and both the Y- and X-axis.
29,00 € HT 35,09 € TTC

Filament guiding tube 6mm-4mm

Filament guiding tube 6mm-4mm
14,00 € HT 16,94 € TTC

Heater cartridge (CTR)

Heater cartridge
14,00 € HT 16,94 € TTC

Z-axis Induction sensor (CRT (XL) / HS (XL))

The induction sensor is used to indicate the home position of the bed on the Z-axis.
34,00 € HT 41,14 € TTC

Leapfrog Electronics Board

Leapfrog Electronics Board
149,00 € HT 180,29 € TTC

Micro switch (CRT / HS)

The micro switch is a mechanical switch. These are used to indicate the home position of the both the X- and Y-axis.
4,50 € HT 5,45 € TTC

Nozzle Block 0.35mm left

Nozzle Block 0.35mm left
19,00 € HT 22,99 € TTC

Nozzle Block 0.35mm right

Nozzle Block 0.35mm right
19,00 € HT 22,99 € TTC

Thermistor (CTR)

Thermistor
5,00 € HT 6,05 € TTC

X-axis linear bearing

Linear bearing used on the X-axis. Inner diameter 8mm.
4,00 € HT 4,84 € TTC