Creatr HS

Push in coupling 3D printer 4mm, M5

Push in coupling 3D printer 4mm, M5
4,50 $US HT 5,45 $US TTC

Push in coupling 3D printer 6mm, M5

Push in coupling 3D printer 6mm, M5
4,50 $US HT 5,45 $US TTC

4 Wire Cable for X (2 connectors) (CRT (XL) / HS (XL) / XD)

4 Wire Cable for X (2 connectors) (CRT (XL) / HS (XL) / XD)
4,31 $US HT 5,22 $US TTC

Push in coupling 3D printer 6mm, M6

Push in coupling 3D printer 6mm, M6
4,31 $US HT 5,22 $US TTC

Nozzle Block 0.5mm right

Nozzle Block 0.5mm right
17,50 $US HT 21,18 $US TTC

Nozzle Block 0.5 mm left

Nozzle Block 0.5 mm left
17,50 $US HT 21,18 $US TTC

US Power cord 110V

Power cord for your Leapfrog Printer, suitable for the US
5,39 $US HT 6,52 $US TTC

Timing belt X-axis

Timing belt X-axis
9,71 $US HT 11,75 $US TTC

Timing belt Y-axis

Timing belt Y-axis
9,71 $US HT 11,75 $US TTC

Fan Duct (HS / HS XL)

Fan Duct (HS / HS XL)
5,39 $US HT 6,52 $US TTC

A20 processor board

A20 processor board
106,76 $US HT 129,18 $US TTC

LMC HS

LMC HS
300,87 $US HT 364,05 $US TTC

Heated Print Bed

Heated Print Bed
109,00 $US HT 131,89 $US TTC

Drive gear

Drive gear
13,50 $US HT 16,34 $US TTC

Creatr Z-axis motor

The Nema 23 stepper motor is used to move the printbed up and down. It has a specially manufactured 6mm axis.
44,21 $US HT 53,49 $US TTC

Drive unit (HS)

Drive unit (HS)
169,00 $US HT 204,49 $US TTC

Drive unit cooler (HS) (set of 2)

Drive unit cooler (HS) (set of 2)
42,06 $US HT 50,89 $US TTC

Extruder/Y-axis/X-axis stepper motor

The Nema 17 stepper motor is used for the extruders and both the Y- and X-axis.
35,00 $US HT 42,35 $US TTC

Filament guiding tube 4mm-2mm

Filament guiding tube 4mm-2mm
15,00 $US HT 18,15 $US TTC

Filament guiding tube 6mm-4mm

Filament guiding tube 6mm-4mm
15,00 $US HT 18,15 $US TTC

Flexi Gland

Flexi Gland
15,10 $US HT 18,27 $US TTC

Heater cartridge assembly (HS)

Heater cartridge assembly (HS)
15,00 $US HT 18,15 $US TTC

HS fan with plug

HS fan with plug
9,00 $US HT 10,89 $US TTC

Z-axis Induction sensor (CRT (XL) / HS (XL))

The induction sensor is used to indicate the home position of the bed on the Z-axis.
39,00 $US HT 47,19 $US TTC

Micro switch (CRT / HS)

The micro switch is a mechanical switch. These are used to indicate the home position of the both the X- and Y-axis.
5,00 $US HT 6,05 $US TTC

Nozzle Block 0.35mm left

Nozzle Block 0.35mm left
19,00 $US HT 22,99 $US TTC

Nozzle Block 0.35mm right

Nozzle Block 0.35mm right
17,50 $US HT 21,18 $US TTC

Printhead PCB

Printhead PCB
10,00 $US HT 12,10 $US TTC

Radial fan 50x50x15 assembly (HS)

Radial fan 50x50x15 assembly (HS)
9,00 $US HT 10,89 $US TTC

Thermistor assembly (HS)

Thermistor assembly
5,50 $US HT 6,66 $US TTC

X-axis linear bearing

Linear bearing used on the X-axis. Inner diameter 8mm.
4,00 $US HT 4,84 $US TTC