Pièces détachées

Creatr HS XLCreatr HS XL

  • Push in coupling 3D printer 4mm, M5

    Push in coupling 3D printer 4mm, M5

    4,00 € HT 4,84 € TTC
  • Push in coupling 3D printer 6mm, M5

    Push in coupling 3D printer 6mm, M5

    4,00 € HT 4,84 € TTC
  • Push in coupling 3D printer 6mm, M6

    Push in coupling 3D printer 6mm, M6

    4,00 € HT 4,84 € TTC
  • Induction sensor

    Induction sensor

    34,00 € HT 41,14 € TTC
  • LMC HS

    LMC HS

    279,00 € HT 337,59 € TTC
  • A20 processor board

    A20 processor board

    99,00 € HT 119,79 € TTC
  • Fan Duct (HS / HS XL)

    Fan Duct (HS / HS XL)

    5,00 € HT 6,05 € TTC
  • Timing belt Y-axis

    Timing belt Y-axis

    9,00 € HT 10,89 € TTC
  • Timing belt X-axis

    Timing belt X-axis

    9,00 € HT 10,89 € TTC
  • Micro switch (XL / HS XL)

    Micro switch (XL / HS XL)

    5,00 € HT 6,05 € TTC
  • Nozzle Block 0.35mm (set of 2)

    Nozzle Block 0.35mm (set of 2)

    33,00 € HT 39,93 € TTC
  • Nozzle Block 0.5mm (set of 2)

    Nozzle Block 0.5mm (set of 2)

    33,00 € HT 39,93 € TTC
  • HS Hot End 0.35mm (set of 2)

    HS Hot End 0.35mm (set of 2)

    68,00 € HT 82,28 € TTC
  • Drive gear / pinch wheel

    Drive gear / pinch wheel

    12,00 € HT 14,52 € TTC
  • HS Drive Unit

    HS Drive Unit

    149,00 € HT 180,29 € TTC
  • HS Drive unit cooler (set of 2)

    HS Drive unit cooler (set of 2)

    39,00 € HT 47,19 € TTC
  • Filament guiding tube 4mm-2mm

    Filament guiding tube 4mm-2mm

    14,00 € HT 16,94 € TTC
  • Filament guiding tube 6mm-4mm

    Filament guiding tube 6mm-4mm

    14,00 € HT 16,94 € TTC
  • Flexi Gland

    Flexi Gland

    14,00 € HT 16,94 € TTC
  • Creatr (HS) Heated Print Bed assembly

    Creatr (HS) Heated Print Bed assembly

    99,00 € HT 119,79 € TTC
  • HS Heater Cartridge assembly

    HS Heater Cartridge assembly

    14,00 € HT 16,94 € TTC
  • HS Fan with Plug

    HS Fan with Plug

    9,00 € HT 10,89 € TTC
  • Printhead PCB

    Printhead PCB

    9,00 € HT 10,89 € TTC
  • HS Radial Fan 50x50x15 24v assembly

    HS Radial Fan 50x50x15 24v assembly

    9,00 € HT 10,89 € TTC
  • HS Thermistor assembly

    HS Thermistor assembly

    5,00 € HT 6,05 € TTC
  • X-axis linear bearing

    X-axis linear bearing

    4,00 € HT 4,84 € TTC
  • NEMA 17 stepper motor (48mm)

    NEMA 17 stepper motor (48mm)

    29,00 € HT 35,09 € TTC

Creatr HSCreatr HS

  • Push in coupling 3D printer 4mm, M5

    Push in coupling 3D printer 4mm, M5

    4,00 € HT 4,84 € TTC
  • Push in coupling 3D printer 6mm, M5

    Push in coupling 3D printer 6mm, M5

    4,00 € HT 4,84 € TTC
  • Push in coupling 3D printer 6mm, M6

    Push in coupling 3D printer 6mm, M6

    4,00 € HT 4,84 € TTC
  • Induction sensor

    Induction sensor

    34,00 € HT 41,14 € TTC
  • LMC HS

    LMC HS

    279,00 € HT 337,59 € TTC
  • A20 processor board

    A20 processor board

    99,00 € HT 119,79 € TTC
  • Fan Duct (HS / HS XL)

    Fan Duct (HS / HS XL)

    5,00 € HT 6,05 € TTC
  • Timing belt Y-axis

    Timing belt Y-axis

    9,00 € HT 10,89 € TTC
  • Timing belt X-axis

    Timing belt X-axis

    9,00 € HT 10,89 € TTC
  • Nozzle Block 0.35mm (set of 2)

    Nozzle Block 0.35mm (set of 2)

    33,00 € HT 39,93 € TTC
  • Nozzle Block 0.5mm (set of 2)

    Nozzle Block 0.5mm (set of 2)

    33,00 € HT 39,93 € TTC
  • HS Hot End 0.35mm (set of 2)

    HS Hot End 0.35mm (set of 2)

    68,00 € HT 82,28 € TTC
  • Drive gear / pinch wheel

    Drive gear / pinch wheel

    12,00 € HT 14,52 € TTC
  • HS Drive Unit

    HS Drive Unit

    149,00 € HT 180,29 € TTC
  • HS Drive unit cooler (set of 2)

    HS Drive unit cooler (set of 2)

    39,00 € HT 47,19 € TTC
  • Filament guiding tube 4mm-2mm

    Filament guiding tube 4mm-2mm

    14,00 € HT 16,94 € TTC
  • Filament guiding tube 6mm-4mm

    Filament guiding tube 6mm-4mm

    14,00 € HT 16,94 € TTC
  • Flexi Gland

    Flexi Gland

    14,00 € HT 16,94 € TTC
  • Creatr (HS) Heated Print Bed assembly

    Creatr (HS) Heated Print Bed assembly

    99,00 € HT 119,79 € TTC
  • HS Heater Cartridge assembly

    HS Heater Cartridge assembly

    14,00 € HT 16,94 € TTC
  • HS Fan with Plug

    HS Fan with Plug

    9,00 € HT 10,89 € TTC
  • Printhead PCB

    Printhead PCB

    9,00 € HT 10,89 € TTC
  • HS Radial Fan 50x50x15 24v assembly

    HS Radial Fan 50x50x15 24v assembly

    9,00 € HT 10,89 € TTC
  • HS Thermistor assembly

    HS Thermistor assembly

    5,00 € HT 6,05 € TTC
  • X-axis linear bearing

    X-axis linear bearing

    4,00 € HT 4,84 € TTC
  • Micro switch (CRT / HS)

    Micro switch (CRT / HS)

    4,50 € HT 5,45 € TTC
  • NEMA 17 stepper motor (48mm)

    NEMA 17 stepper motor (48mm)

    29,00 € HT 35,09 € TTC

CreatrCreatr

  • Push in coupling 3D printer 4mm, M5

    Push in coupling 3D printer 4mm, M5

    4,00 € HT 4,84 € TTC
  • Push in coupling 3D printer 6mm, M5

    Push in coupling 3D printer 6mm, M5

    4,00 € HT 4,84 € TTC
  • Push in coupling 3D printer 6mm, M6

    Push in coupling 3D printer 6mm, M6

    4,00 € HT 4,84 € TTC
  • Induction sensor

    Induction sensor

    34,00 € HT 41,14 € TTC
  • Timing belt Y-axis

    Timing belt Y-axis

    9,00 € HT 10,89 € TTC
  • Timing belt X-axis

    Timing belt X-axis

    9,00 € HT 10,89 € TTC
  • Nozzle Block 0.35mm (set of 2)

    Nozzle Block 0.35mm (set of 2)

    33,00 € HT 39,93 € TTC
  • Nozzle Block 0.5mm (set of 2)

    Nozzle Block 0.5mm (set of 2)

    33,00 € HT 39,93 € TTC
  • Drive gear / pinch wheel

    Drive gear / pinch wheel

    12,00 € HT 14,52 € TTC
  • Filament guiding tube 6mm-4mm

    Filament guiding tube 6mm-4mm

    14,00 € HT 16,94 € TTC
  • Creatr (HS) Heated Print Bed assembly

    Creatr (HS) Heated Print Bed assembly

    99,00 € HT 119,79 € TTC
  • X-axis linear bearing

    X-axis linear bearing

    4,00 € HT 4,84 € TTC
  • Micro switch (CRT / HS)

    Micro switch (CRT / HS)

    4,50 € HT 5,45 € TTC
  • Creatr Y Carriage assembly (left)

    Creatr Y Carriage assembly (left)

    14,00 € HT 16,94 € TTC
  • Creatr Y Carriage assembly (right)

    Creatr Y Carriage assembly (right)

    14,00 € HT 16,94 € TTC
  • Creatr fan set with plugs

    Creatr fan set with plugs

    9,00 € HT 10,89 € TTC
  • Creatr / Creatr XL Hot End 0.35mm single

    Creatr / Creatr XL Hot End 0.35mm single

    39,00 € HT 47,19 € TTC
  • Creatr Power Supply

    Creatr Power Supply

    99,00 € HT 119,79 € TTC
  • Heater cartridge (CTR)

    Heater cartridge (CTR)

    14,00 € HT 16,94 € TTC
  • Thermistor (CTR)

    Thermistor (CTR)

    5,00 € HT 6,05 € TTC
  • NEMA 17 stepper motor (48mm)

    NEMA 17 stepper motor (48mm)

    29,00 € HT 35,09 € TTC

Creatr XLCreatr XL

  • Push in coupling 3D printer 6mm, M6

    Push in coupling 3D printer 6mm, M6

    4,00 € HT 4,84 € TTC
  • Induction sensor

    Induction sensor

    34,00 € HT 41,14 € TTC
  • Timing belt Y-axis

    Timing belt Y-axis

    9,00 € HT 10,89 € TTC
  • Timing belt X-axis

    Timing belt X-axis

    9,00 € HT 10,89 € TTC
  • Micro switch (XL / HS XL)

    Micro switch (XL / HS XL)

    5,00 € HT 6,05 € TTC
  • Nozzle Block 0.35mm (set of 2)

    Nozzle Block 0.35mm (set of 2)

    33,00 € HT 39,93 € TTC
  • Nozzle Block 0.5mm (set of 2)

    Nozzle Block 0.5mm (set of 2)

    33,00 € HT 39,93 € TTC
  • Drive gear / pinch wheel

    Drive gear / pinch wheel

    12,00 € HT 14,52 € TTC
  • Filament guiding tube 6mm-4mm

    Filament guiding tube 6mm-4mm

    14,00 € HT 16,94 € TTC
  • Creatr (HS) Heated Print Bed assembly

    Creatr (HS) Heated Print Bed assembly

    99,00 € HT 119,79 € TTC
  • X-axis linear bearing

    X-axis linear bearing

    4,00 € HT 4,84 € TTC
  • Creatr fan set with plugs

    Creatr fan set with plugs

    9,00 € HT 10,89 € TTC
  • Creatr / Creatr XL Hot End 0.35mm single

    Creatr / Creatr XL Hot End 0.35mm single

    39,00 € HT 47,19 € TTC
  • Creatr Power Supply

    Creatr Power Supply

    99,00 € HT 119,79 € TTC
  • Heater cartridge (CTR)

    Heater cartridge (CTR)

    14,00 € HT 16,94 € TTC
  • Thermistor (CTR)

    Thermistor (CTR)

    5,00 € HT 6,05 € TTC
  • NEMA 17 stepper motor (48mm)

    NEMA 17 stepper motor (48mm)

    29,00 € HT 35,09 € TTC

XeedXeed

  • Nozzle Block 0.35mm (set of 2)

    Nozzle Block 0.35mm (set of 2)

    33,00 € HT 39,93 € TTC
  • Nozzle Block 0.5mm (set of 2)

    Nozzle Block 0.5mm (set of 2)

    33,00 € HT 39,93 € TTC
  • Drive gear / pinch wheel

    Drive gear / pinch wheel

    12,00 € HT 14,52 € TTC
  • XEED Glass Hot Bed assembly

    XEED Glass Hot Bed assembly

    199,00 € HT 240,79 € TTC
  • XEED Composite Hot Bed assembly

    XEED Composite Hot Bed assembly

    499,00 € HT 603,79 € TTC
  • XEED Hot End 0.35mm (set of 2)

    XEED Hot End 0.35mm (set of 2)

    99,00 € HT 119,79 € TTC

BoltBolt

  • Bolt Standard Hot End 0.35mm (set)

    Bolt Standard Hot End 0.35mm (set)

    175,00 € HT 211,75 € TTC
  • Bolt Pro Print Head PCB v3

    Bolt Pro Print Head PCB v3

    60,00 € HT 72,60 € TTC

Bolt ProBolt Pro

  • Bolt Pro Print Head PCB v3

    Bolt Pro Print Head PCB v3

    60,00 € HT 72,60 € TTC
  • Bolt Pro High Temp Hot End 0.35mm (set)

    Bolt Pro High Temp Hot End 0.35mm (set)

    300,00 € HT 363,00 € TTC
  • Bolt Pro High Flow Hot End 0.80mm (set)

    Bolt Pro High Flow Hot End 0.80mm (set)

    200,00 € HT 242,00 € TTC
  • Bolt Pro Stainless Steel Hot End 0.50mm (set)

    Bolt Pro Stainless Steel Hot End 0.50mm (set)

    250,00 € HT 302,50 € TTC
  • Bolt Pro Standard Hot End V2 0.35mm (set)

    Bolt Pro Standard Hot End V2 0.35mm (set)

    150,00 € HT 181,50 € TTC
Show more