Componentes

Creatr HS XLCreatr HS XL

  • Push in coupling 3D printer 4mm, M5

    Push in coupling 3D printer 4mm, M5

    4,50 $ IVA no incluido 5,45 $ IVA incluido
  • Push in coupling 3D printer 6mm, M5

    Push in coupling 3D printer 6mm, M5

    4,50 $ IVA no incluido 5,45 $ IVA incluido
  • Push in coupling 3D printer 6mm, M6

    Push in coupling 3D printer 6mm, M6

    4,70 $ IVA no incluido 5,69 $ IVA incluido
  • Z-axis Induction sensor (CRT (XL) / HS (XL))

    Z-axis Induction sensor (CRT (XL) / HS (XL))

    39,00 $ IVA no incluido 47,19 $ IVA incluido
  • LMC HS

    LMC HS

    327,80 $ IVA no incluido 396,64 $ IVA incluido
  • A20 processor board

    A20 processor board

    116,32 $ IVA no incluido 140,75 $ IVA incluido
  • Fan Duct (HS / HS XL)

    Fan Duct (HS / HS XL)

    5,87 $ IVA no incluido 7,10 $ IVA incluido
  • Timing belt Y-axis

    Timing belt Y-axis

    10,57 $ IVA no incluido 12,79 $ IVA incluido
  • Timing belt X-axis

    Timing belt X-axis

    10,57 $ IVA no incluido 12,79 $ IVA incluido
  • Micro switch (XL / HS XL)

    Micro switch (XL / HS XL)

    5,87 $ IVA no incluido 7,10 $ IVA incluido
  • Nozzle Block 0.5 mm left

    Nozzle Block 0.5 mm left

    17,50 $ IVA no incluido 21,18 $ IVA incluido
  • Nozzle Block 0.5mm right

    Nozzle Block 0.5mm right

    17,50 $ IVA no incluido 21,18 $ IVA incluido
  • Drive gear

    Drive gear

    13,50 $ IVA no incluido 16,34 $ IVA incluido
  • Drive unit (HS)

    Drive unit (HS)

    169,00 $ IVA no incluido 204,49 $ IVA incluido
  • Drive unit cooler (HS) (set of 2)

    Drive unit cooler (HS) (set of 2)

    45,82 $ IVA no incluido 55,44 $ IVA incluido
  • Filament guiding tube 4mm-2mm

    Filament guiding tube 4mm-2mm

    15,00 $ IVA no incluido 18,15 $ IVA incluido
  • Filament guiding tube 6mm-4mm

    Filament guiding tube 6mm-4mm

    15,00 $ IVA no incluido 18,15 $ IVA incluido
  • Flexi Gland

    Flexi Gland

    16,45 $ IVA no incluido 19,90 $ IVA incluido
  • Creatr Heated Print Bed

    Creatr Heated Print Bed

    109,00 $ IVA no incluido 131,89 $ IVA incluido
  • Heater cartridge assembly (HS)

    Heater cartridge assembly (HS)

    15,00 $ IVA no incluido 18,15 $ IVA incluido
  • HS fan with plug

    HS fan with plug

    9,00 $ IVA no incluido 10,89 $ IVA incluido
  • Nozzle Block 0.35mm left

    Nozzle Block 0.35mm left

    19,00 $ IVA no incluido 22,99 $ IVA incluido
  • Nozzle Block 0.35mm right

    Nozzle Block 0.35mm right

    17,50 $ IVA no incluido 21,18 $ IVA incluido
  • Printhead PCB

    Printhead PCB

    10,00 $ IVA no incluido 12,10 $ IVA incluido
  • Radial fan 50x50x15 24V assembly (HS)

    Radial fan 50x50x15 24V assembly (HS)

    9,00 $ IVA no incluido 10,89 $ IVA incluido
  • Thermistor assembly (HS)

    Thermistor assembly (HS)

    5,50 $ IVA no incluido 6,66 $ IVA incluido
  • X-axis linear bearing

    X-axis linear bearing

    4,00 $ IVA no incluido 4,84 $ IVA incluido
  • NEMA 17 stepper motor (48mm)

    NEMA 17 stepper motor (48mm)

    35,00 $ IVA no incluido 42,35 $ IVA incluido
  • US Power cord (110V)

    US Power cord (110V)

    5,87 $ IVA no incluido 7,10 $ IVA incluido

Creatr HSCreatr HS

  • Push in coupling 3D printer 4mm, M5

    Push in coupling 3D printer 4mm, M5

    4,50 $ IVA no incluido 5,45 $ IVA incluido
  • Push in coupling 3D printer 6mm, M5

    Push in coupling 3D printer 6mm, M5

    4,50 $ IVA no incluido 5,45 $ IVA incluido
  • Push in coupling 3D printer 6mm, M6

    Push in coupling 3D printer 6mm, M6

    4,70 $ IVA no incluido 5,69 $ IVA incluido
  • Z-axis Induction sensor (CRT (XL) / HS (XL))

    Z-axis Induction sensor (CRT (XL) / HS (XL))

    39,00 $ IVA no incluido 47,19 $ IVA incluido
  • LMC HS

    LMC HS

    327,80 $ IVA no incluido 396,64 $ IVA incluido
  • A20 processor board

    A20 processor board

    116,32 $ IVA no incluido 140,75 $ IVA incluido
  • Fan Duct (HS / HS XL)

    Fan Duct (HS / HS XL)

    5,87 $ IVA no incluido 7,10 $ IVA incluido
  • Timing belt Y-axis

    Timing belt Y-axis

    10,57 $ IVA no incluido 12,79 $ IVA incluido
  • Timing belt X-axis

    Timing belt X-axis

    10,57 $ IVA no incluido 12,79 $ IVA incluido
  • Nozzle Block 0.5 mm left

    Nozzle Block 0.5 mm left

    17,50 $ IVA no incluido 21,18 $ IVA incluido
  • Nozzle Block 0.5mm right

    Nozzle Block 0.5mm right

    17,50 $ IVA no incluido 21,18 $ IVA incluido
  • Drive gear

    Drive gear

    13,50 $ IVA no incluido 16,34 $ IVA incluido
  • Drive unit (HS)

    Drive unit (HS)

    169,00 $ IVA no incluido 204,49 $ IVA incluido
  • Drive unit cooler (HS) (set of 2)

    Drive unit cooler (HS) (set of 2)

    45,82 $ IVA no incluido 55,44 $ IVA incluido
  • Filament guiding tube 4mm-2mm

    Filament guiding tube 4mm-2mm

    15,00 $ IVA no incluido 18,15 $ IVA incluido
  • Filament guiding tube 6mm-4mm

    Filament guiding tube 6mm-4mm

    15,00 $ IVA no incluido 18,15 $ IVA incluido
  • Flexi Gland

    Flexi Gland

    16,45 $ IVA no incluido 19,90 $ IVA incluido
  • Creatr Heated Print Bed

    Creatr Heated Print Bed

    109,00 $ IVA no incluido 131,89 $ IVA incluido
  • Heater cartridge assembly (HS)

    Heater cartridge assembly (HS)

    15,00 $ IVA no incluido 18,15 $ IVA incluido
  • HS fan with plug

    HS fan with plug

    9,00 $ IVA no incluido 10,89 $ IVA incluido
  • Nozzle Block 0.35mm left

    Nozzle Block 0.35mm left

    19,00 $ IVA no incluido 22,99 $ IVA incluido
  • Nozzle Block 0.35mm right

    Nozzle Block 0.35mm right

    17,50 $ IVA no incluido 21,18 $ IVA incluido
  • Printhead PCB

    Printhead PCB

    10,00 $ IVA no incluido 12,10 $ IVA incluido
  • Radial fan 50x50x15 24V assembly (HS)

    Radial fan 50x50x15 24V assembly (HS)

    9,00 $ IVA no incluido 10,89 $ IVA incluido
  • Thermistor assembly (HS)

    Thermistor assembly (HS)

    5,50 $ IVA no incluido 6,66 $ IVA incluido
  • X-axis linear bearing

    X-axis linear bearing

    4,00 $ IVA no incluido 4,84 $ IVA incluido
  • Micro switch (CRT / HS)

    Micro switch (CRT / HS)

    5,00 $ IVA no incluido 6,05 $ IVA incluido
  • NEMA 17 stepper motor (48mm)

    NEMA 17 stepper motor (48mm)

    35,00 $ IVA no incluido 42,35 $ IVA incluido
  • US Power cord (110V)

    US Power cord (110V)

    5,87 $ IVA no incluido 7,10 $ IVA incluido

CreatrCreatr

  • Push in coupling 3D printer 4mm, M5

    Push in coupling 3D printer 4mm, M5

    4,50 $ IVA no incluido 5,45 $ IVA incluido
  • Push in coupling 3D printer 6mm, M5

    Push in coupling 3D printer 6mm, M5

    4,50 $ IVA no incluido 5,45 $ IVA incluido
  • Push in coupling 3D printer 6mm, M6

    Push in coupling 3D printer 6mm, M6

    4,70 $ IVA no incluido 5,69 $ IVA incluido
  • Z-axis Induction sensor (CRT (XL) / HS (XL))

    Z-axis Induction sensor (CRT (XL) / HS (XL))

    39,00 $ IVA no incluido 47,19 $ IVA incluido
  • Timing belt Y-axis

    Timing belt Y-axis

    10,57 $ IVA no incluido 12,79 $ IVA incluido
  • Timing belt X-axis

    Timing belt X-axis

    10,57 $ IVA no incluido 12,79 $ IVA incluido
  • Nozzle Block 0.5 mm left

    Nozzle Block 0.5 mm left

    17,50 $ IVA no incluido 21,18 $ IVA incluido
  • Nozzle Block 0.5mm right

    Nozzle Block 0.5mm right

    17,50 $ IVA no incluido 21,18 $ IVA incluido
  • Drive gear

    Drive gear

    13,50 $ IVA no incluido 16,34 $ IVA incluido
  • Filament guiding tube 6mm-4mm

    Filament guiding tube 6mm-4mm

    15,00 $ IVA no incluido 18,15 $ IVA incluido
  • Creatr Heated Print Bed

    Creatr Heated Print Bed

    109,00 $ IVA no incluido 131,89 $ IVA incluido
  • Nozzle Block 0.35mm left

    Nozzle Block 0.35mm left

    19,00 $ IVA no incluido 22,99 $ IVA incluido
  • Nozzle Block 0.35mm right

    Nozzle Block 0.35mm right

    17,50 $ IVA no incluido 21,18 $ IVA incluido
  • X-axis linear bearing

    X-axis linear bearing

    4,00 $ IVA no incluido 4,84 $ IVA incluido
  • Micro switch (CRT / HS)

    Micro switch (CRT / HS)

    5,00 $ IVA no incluido 6,05 $ IVA incluido
  • Y carriage assembly left (CTR)

    Y carriage assembly left (CTR)

    16,45 $ IVA no incluido 19,90 $ IVA incluido
  • Y carriage assembly right (CTR)

    Y carriage assembly right (CTR)

    16,45 $ IVA no incluido 19,90 $ IVA incluido
  • Creatr fan set with plug

    Creatr fan set with plug

    9,00 $ IVA no incluido 10,89 $ IVA incluido
  • interchangeable Creatr (XL) Hot End 0.35 mm

    interchangeable Creatr (XL) Hot End 0.35 mm

    45,00 $ IVA no incluido 54,45 $ IVA incluido
  • Creatr Power Supply

    Creatr Power Supply

    109,00 $ IVA no incluido 131,89 $ IVA incluido
  • Heater cartridge (CTR)

    Heater cartridge (CTR)

    15,00 $ IVA no incluido 18,15 $ IVA incluido
  • Leapfrog Electronics Board

    Leapfrog Electronics Board

    175,06 $ IVA no incluido 211,82 $ IVA incluido
  • Thermistor (CTR)

    Thermistor (CTR)

    5,00 $ IVA no incluido 6,05 $ IVA incluido
  • NEMA 17 stepper motor (48mm)

    NEMA 17 stepper motor (48mm)

    35,00 $ IVA no incluido 42,35 $ IVA incluido
  • US Power cord (110V)

    US Power cord (110V)

    5,87 $ IVA no incluido 7,10 $ IVA incluido

Creatr XLCreatr XL

  • Push in coupling 3D printer 6mm, M6

    Push in coupling 3D printer 6mm, M6

    4,70 $ IVA no incluido 5,69 $ IVA incluido
  • Z-axis Induction sensor (CRT (XL) / HS (XL))

    Z-axis Induction sensor (CRT (XL) / HS (XL))

    39,00 $ IVA no incluido 47,19 $ IVA incluido
  • Timing belt Y-axis

    Timing belt Y-axis

    10,57 $ IVA no incluido 12,79 $ IVA incluido
  • Timing belt X-axis

    Timing belt X-axis

    10,57 $ IVA no incluido 12,79 $ IVA incluido
  • Micro switch (XL / HS XL)

    Micro switch (XL / HS XL)

    5,87 $ IVA no incluido 7,10 $ IVA incluido
  • Nozzle Block 0.5 mm left

    Nozzle Block 0.5 mm left

    17,50 $ IVA no incluido 21,18 $ IVA incluido
  • Nozzle Block 0.5mm right

    Nozzle Block 0.5mm right

    17,50 $ IVA no incluido 21,18 $ IVA incluido
  • Drive gear

    Drive gear

    13,50 $ IVA no incluido 16,34 $ IVA incluido
  • Filament guiding tube 6mm-4mm

    Filament guiding tube 6mm-4mm

    15,00 $ IVA no incluido 18,15 $ IVA incluido
  • Creatr Heated Print Bed

    Creatr Heated Print Bed

    109,00 $ IVA no incluido 131,89 $ IVA incluido
  • Nozzle Block 0.35mm left

    Nozzle Block 0.35mm left

    19,00 $ IVA no incluido 22,99 $ IVA incluido
  • Nozzle Block 0.35mm right

    Nozzle Block 0.35mm right

    17,50 $ IVA no incluido 21,18 $ IVA incluido
  • X-axis linear bearing

    X-axis linear bearing

    4,00 $ IVA no incluido 4,84 $ IVA incluido
  • Creatr fan set with plug

    Creatr fan set with plug

    9,00 $ IVA no incluido 10,89 $ IVA incluido
  • interchangeable Creatr (XL) Hot End 0.35 mm

    interchangeable Creatr (XL) Hot End 0.35 mm

    45,00 $ IVA no incluido 54,45 $ IVA incluido
  • Creatr Power Supply

    Creatr Power Supply

    109,00 $ IVA no incluido 131,89 $ IVA incluido
  • Heater cartridge (CTR)

    Heater cartridge (CTR)

    15,00 $ IVA no incluido 18,15 $ IVA incluido
  • Leapfrog Electronics Board

    Leapfrog Electronics Board

    175,06 $ IVA no incluido 211,82 $ IVA incluido
  • Thermistor (CTR)

    Thermistor (CTR)

    5,00 $ IVA no incluido 6,05 $ IVA incluido
  • NEMA 17 stepper motor (48mm)

    NEMA 17 stepper motor (48mm)

    35,00 $ IVA no incluido 42,35 $ IVA incluido
  • US Power cord (110V)

    US Power cord (110V)

    5,87 $ IVA no incluido 7,10 $ IVA incluido

XeedXeed

  • Drive gear

    Drive gear

    13,50 $ IVA no incluido 16,34 $ IVA incluido
  • Nozzle Block 0.35mm left

    Nozzle Block 0.35mm left

    19,00 $ IVA no incluido 22,99 $ IVA incluido
  • Nozzle Block 0.35mm right

    Nozzle Block 0.35mm right

    17,50 $ IVA no incluido 21,18 $ IVA incluido
  • Glass Hot Bed assembly (XD)

    Glass Hot Bed assembly (XD)

    233,81 $ IVA no incluido 282,91 $ IVA incluido
  • Composite Hot Bed assembly (XD)

    Composite Hot Bed assembly (XD)

    559,00 $ IVA no incluido 676,39 $ IVA incluido
  • Xeed Hot End (set of 2)

    Xeed Hot End (set of 2)

    109,00 $ IVA no incluido 131,89 $ IVA incluido
  • US Power cord (110V)

    US Power cord (110V)

    5,87 $ IVA no incluido 7,10 $ IVA incluido

BoltBolt

  • Bolt Standard Hot End 0.35mm set (set)

    Bolt Standard Hot End 0.35mm set (set)

    205,61 $ IVA no incluido 248,79 $ IVA incluido
  • Bolt Standard Hot End 0.35mm left

    Bolt Standard Hot End 0.35mm left

    116,32 $ IVA no incluido 140,75 $ IVA incluido
  • Bolt Standard Hot End 0.35mm right

    Bolt Standard Hot End 0.35mm right

    116,32 $ IVA no incluido 140,75 $ IVA incluido

Bolt ProBolt Pro

  • Bolt Pro High Temp Hot End 0.35mm (set)

    Bolt Pro High Temp Hot End 0.35mm (set)

    352,47 $ IVA no incluido 426,49 $ IVA incluido
  • Bolt Pro High Flow Hot End 0.80mm (set)

    Bolt Pro High Flow Hot End 0.80mm (set)

    234,98 $ IVA no incluido 284,33 $ IVA incluido
  • Bolt Pro High Flow Hot End 0.80mm (single)

    Bolt Pro High Flow Hot End 0.80mm (single)

    146,86 $ IVA no incluido 177,70 $ IVA incluido
  • Bolt Pro Stainless Steel Hot End 0.50mm (set)

    Bolt Pro Stainless Steel Hot End 0.50mm (set)

    293,73 $ IVA no incluido 355,41 $ IVA incluido
  • Bolt Pro Stainless Steel Hot End 0.50mm (single)

    Bolt Pro Stainless Steel Hot End 0.50mm (single)

    176,24 $ IVA no incluido 213,25 $ IVA incluido
  • Bolt Pro Composite Bed assembly

    Bolt Pro Composite Bed assembly

    468,79 $ IVA no incluido 567,24 $ IVA incluido
  • Bolt Pro Standard Hot End V2 0.35mm (single)

    Bolt Pro Standard Hot End V2 0.35mm (single)

    116,32 $ IVA no incluido 140,75 $ IVA incluido
  • Bolt Pro Standard Hot End V2 0.35mm (set)

    Bolt Pro Standard Hot End V2 0.35mm (set)

    176,24 $ IVA no incluido 213,25 $ IVA incluido
Show more